Bosch PLM-8CS - Page 47

PLENA matrix Technical Data | en 47
Bosch Security Systems B.V.
User manual
2020-12 | V1.1 |
Rated output power per channel (burst *):
– PLM‑4P125 130W
– PLM‑4P220 220W
Bridged (CH 1‑2 / 3‑4) (continous *):
– PLM‑4P125 250W
– PLM‑4P220 385W
Bridged (CH 1‑2 / 3‑4) (burst *):
– PLM‑4P125 250W
– PLM‑4P220 445W
THD+N (1kHz, 6dBFS):
– PLM‑4P125 0.1%
– PLM‑4P220 0.03%
Dynamic range (A‑weighted):
– PLM‑4P125 >101dB
– PLM‑4P220 >102dB
Frequency response (-1dB) 65Hz to 20kHz (+0/‑3dB)
Crosstalk @ 1kHz <-70dB
* According to CEA‑490‑A R‑2008
Connectors
Inputs (wired in parallel): – 4x 3‑pin XLR balanced
– 4x 3‑pole balanced Phoenix
terminal (Metric)
– 1x RJ45 (Amp Link)
– Loudspeaker output 4x 3‑pole Phoenix terminal (Metric)
– Logic and standby overide 2‑pole Phoenix terminal (Metric)
Ethernet Network 10/100Mbps RJ45
12V output power for motion sensor 2‑pole Phoenix terminal (Metric)