Bosch PRS-1AIP1 - Network Settings; Streaming Settings; Partner Table Configuration; Outgoing Route Table Setup

Configuration page
Click CONFIGURATION on top of the page. The Network menu on the left side is opened as a
default. Here you can set the parameters for the:
Network (default page)
– Streaming
– Partner Table
– Outgoing Route Table
– Control
Audio Settings
Supervision
Control I/O mapping
– Control Input Mapping Table
– Control Output Mapping Table
Serial
SNMP
Security
Default Settings
Figure 6.2: Configuration (Network) screen example
6.2
IP Audio Interface Configuration | en 17
Bosch Security Systems B.V. Operating Manual 2013.03 | V2.0 |