English–31 609 929 J73 • (06.03) PS
Always use saw blades of the correct size and
with matching mounting holes (e. g., star>form or
round). Saw blades that do not fit to the mounting
parts of the saw run out of balance and lead to loss of
control.
Do not use saw blades of high alloy steel (HSS
steel). Such saw blades can easily break.
Do not take hold of the saw blade after working
before it has cooled. The saw blade becomes very
hot while working.
Never use the power tool without the table insert.
Replace a defective table insert. Without a table in$
sert plate that is free of defects, injuries can occur on
the saw blade.
Bosch can ensure flawless functioning of the machine
only when original accessories intended for the ma$
chine are used.
SYMBOLS
In addition, observe detailed handling instructions in the OPERATING INSTRUCTIONS Section.
Symbol Meaning
Wear hearing protection.
Wear a dust protection mask.
Wear protective glasses.
Keep fingers, hands and arms away from the rotating saw blade.
The power tool, accessories and packaging should be recycled in an
environmentally friendly manner.
Only for EU countries:
Do not throw power tools in the household waste!
According to the European Guide Lines 2002/96/EG on old electric and
electronic equipment and their translation into national laws, power
tools that are no longer usable must be collected separately and recy$
cled in an environmentally friendly manner.
PTS10_WEU.book Seite 3 Donnerstag, 23. März 2006 11:47 11
To Next Page
Loading...
