Bosch rexroth 12 Series - Page 37

RE 92802-01-B/2023-03-27, BoschRexrothAG
Installation | A15VSO/A15VLO series 12 37/60
WARNING! Leaky and bursting stud ends!
For ttings, if astud end that does not match the system of units, kind of seal and
size of the female thread is pressurized, the stud end may loosen itself or even
be ejected from the hole in aprojectile-like manner. This can result in serious injury
and property damage. Hydraulic uid can escape from this leakage point.
▶ Use the drawings (installation drawing) to determine the required stud end for
each tting.
▶ Make sure the right ttings, mounting bolts and threaded plugs are installed.
▶ For all female threads, use astud end from the same system of units and of the
correct size.
M T
2
A
S
P
T
1
M
A
T
3
Fig� 10: Port overview A15VLO with E2DR controller, clockwise rotation
M T
2
A
S
P
X
T
1
M
A
T
3
Fig� 11: Port overview A15VSO with LRDRS0 control, clockwise rotation
Port overview