DOK-INDRV*-HCS02*UL
·--1803-EN-P
Bosch
Rexroth
AG
15/69
Rexroth
lndraDrive
Drive
Controllers
Power
Sections
HCS02
1
1.1
1.1.1
Important
Notes
Safety
Instructions
General
Information
Important Notes
•
Do
not attempt to install and operate the components
of
the electric drive
and
control system without first reading all documentation provided with
the product. Read and understand these safety instructions and
all user
documentation prior to working with these components.
If you do not have
the user documentation for the components, contact your
responsible
Rexroth sales partner. Ask for these documents to
be
sent immediately to
the person or persons
responsible for the safe operation of the compo-
nents.
• If the supplied documents contain some information you do not under-
stand, it
is
absolutely necessary that you ask Rexroth for explanation
before you start working at or with the components.
• If the component
is
resold, rented and/or passed
on
to others
in
any other
form, these safety instructions must
be
delivered with the component
in
the official language
of
the user's country.
• Only qualified persons may work with components
of
the electric drive and
control system or within its proximity.
In
terms
of
this Instruction Manual, qualified persons are those persons
who are
familiar with the installation, mounting, commissioning and oper-
ation of the components
of
the electric drive and control system,
as
well
as
with the hazards this implies, and who possess the qualifications their
work requires. To
comply with these qualifications, it
is
necessary, among
other things,
to
be
trained, instructed or authorized to switch electric circuits and
components
safely
on
and off, to ground them and to mark them,
to
be
trained or instructed to maintain and use adequate safety
equipment,
to attend a course of instruction
in
fi
rst aid.
• The technical data, connection and installation conditions of the compo-
nents are specified
in
the respective application documentations and must
be
followed at all times.
• If the components take the form of hardware, then they must remain
in
their original state,
in
other words, no structural changes are permitted. It
is
not permitted to decompile software components or alter source codes.
•
Do
not mount damaged or faulty components or use them
in
operation.
• Only use accessories and spare parts approved by Rexroth.
• Follow the safety regulations and requirements
of
the country
in
which the
electric components of the electric drive and control system are operated.
• Proper and correct transport, storage, mounting and installation, as well
as care
in
operation and maintenance, are prerequisites for optimal and
safe operation
of
the component.
Improper
use
of
these
components,
failure
to
follow
the
safety
instructions
in
this
document
or
tampering
with
the
product,
including
disabling
of
safety
de-
vices,
could
result
in
property
damage,
injury,
electric
shock
or
even
death.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
