60/69
Accessori
es
Bosch
Rexroth
AG
DOK-INDRV*-HCS02*UL
-*-1803-EN-P
Rexroth lndraDrive Drive Controllers Power Sections HCS02
7.2
Information
on
Accessory
HAS02
~
~
'
Er=
The supplied product insert shows how the parts of the acces-
. 4
I
-~--
-
sory are arranged.
o=-=
-
~
IJ>
~
rl
·-
'-
~
Fig
.
7-2
:
Product
/nse/1
Mounting Example Accessory HAS02.1-002
2
3
5 4
1 Screw
in
thread at bottom of device
2 Fixing devi
ce
3 Shieldi
ng
plate
4 S
hi
eld of motor cable
5
Cl
ip
Fig
. 7-3: Strain
Relief
and
Shield
Connection
of
Motor
Cable
How
to
mount
the
accessory
1. Unscrew bottom mounting screw of device.
2. Put fixing device to bottom of device and screw down mounting screw of
device again.
3.
Screw supplied screw
in
thread at bottom of device.
4.
Screw shielding plate to fixing device according to desired cable routing
of motor
cable. (The figure illustrates cable routing with 45°
.)
5.
According to diameter of motor cable, fix motor cable at corresponding
point of
shielding plate with a clip. Make sure that shield
of
motor cable
has good contact with shielding plate.
The mounting of the accessory
is
similar for all devices. Exception: With
HAS02.1 -
01
0 (at HMS02.1 N-W0028 I 54), the fixing device
is
screwed to the
equipment grounding conductor connections of the device.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
