Electric Drives
and Controls
1−9Bosch Rexroth AGBT 6.1901070087068 / 01
Safety Instructions
DANGER
Danger of bruises through electrode movement!
All users, line designers, welding machine manufacturers and
welding gun producers are obliged to connect output signals
which initiate the electrode movement so that the applicable sa-
fety regulations are complied with.
For example, by means of ”Two-handed start”, fences, light bar-
riers etc. the risk of bruises can be considerably reduced.
CAUTION
Overheating through inappropriate or insufficient cooling.
The temperature inside the housing must stay within the specified
range.
1.8 Retrofits and Modifications by the User
DANGER
Modifications to the product may have negative effects on the
safety of the unit!
The possible consequences include death, severe or light injury
(personal injury), damage to property or environmental hazards.
Therefore, please contact us prior to making any modifications.
This is the only way to determine whether changes can be made
without any problems.
To Next Page
Loading...
