Electric Drives
and Controls
4−1Bosch Rexroth AGBT 6.1901070087068 / 01
Operation
4 Operation
The BT 6.190 provides you access to user- and control-specific data that
are important to the production process (e.g. display/modification of wel-
ding parameters, display of current I/O signals).
CAUTION
Damage to the system or to the workpiece is possible.
Do not make any random changes to data. All data are transferred
online to the weld timer. Incorrectly set data can cause damage to
the system or to the workpiece!
To Next Page
Loading...
