1−12 Electric Drives
and Controls
Bosch Rexroth AG BT 6.190 1070087068 / 01
Safety Instructions
1.11 CE mark
CAUTION
The CE certificate for the described device combination is valid for
use in an industrial environment
For other combinations/applications, the certificate must be deri-
ved from the above, or a new certificate must be issued, if neces-
sary, by the line designer / user.
The described product is an application variant that, due to its
characteristics, cannot satisfy the regulations for terminals,
machines or systems from the start. Therefore, it may be used only
as described.
The electical and mechanical safety and the ambient environment
(foreign bodies, moisture) must be evaluated on the terminal when
it has been installed.
IThe EMC characteristics of this product may change after it has
been installed. As a result, a check of the EMC characteristics of
the end product (terminals, machine, systems) by the
manufacturer of the end product is advisable.
To Next Page
Loading...
