Bosch Rexroth VT-HMC 1X Series - Connecting the individual contacts

RE 30239-B, Edition 01.2021, Bosch Rexroth AG
Installation | Digital axis control VT-HMC...1X 21/36
7.3.6 Connecting the individual contacts
Fig. 3: XG20/XG21: “PUSH-IN“ contact
Fig. 4: XD1: Tension spring terminals
The tightening torque for mounting the plug-in connector is 0.2 - 0.25 Nm.
Solid wire
With wire end ferrule
Flexible wire
1.
2.
3.
10 mm
1.
2.