RE 30239-B, Edition 01.2021, Bosch Rexroth AG
About this documentation | Digital axis control VT-HMC...1X 7/36
1.3.4 Abbreviations
The following abbreviations are used in this documentation:
Tabelle 5: Abbreviations
Abbreviation Meaning
CPU Central Processing Unit
I/O Inputs/Outputs
EMC Electromagnetic compatibility
FAT32 32-bit File Allocation Table
FC Frequency converter
HMC Hydraulic Motion Control
PC Personal Computer
PLC Programmable Logic Control
PELV Protective Extra Low Voltage
n.c. not connected
To Next Page
Loading...
