The First Touch website communicates via the encrypted https protocol. Enter
the URL (https://192.168.1.1/ or https://192.168.234.234) and then confirm the
respective security certificate before the website can be loaded.
After loading the First Touch website, a "Welcome" page is displayed. A user log-
in is required to navigate to other First Touch sites. To log in, enter user name
and password into both the form fields of the navigation bar.
The default user ID is:
● User name: boschrexroth
● Password: boschrexroth
Fig. 12-6: "Welcome" dialog
12.3.1 Hardware data
The "Hardware" site of the IndraControl First Touch lists all device-specific data
of the XM2x control in a table.
● Material index
● Hardware type plate
● Serial number
● Part number
12.3.2 Network settings
The "Network" site of the IndraControl First Touch is used to configure the net-
work settings during the initial commissioning. The currently configured network
settings are shown in the following three fields and can also be changed using
these fields:
● IP address
44/69
Device description
IndraControl XM21, XM22 Controls
Bosch Rexroth AG R911340667_Edition 04
To Next Page
Loading...
