6 720 680 174 (2014/05) Therm 8000S
10 | Operating instructions
4.1 Description LCD Display
Fig. 5 Power bar indicator (input)
Fig. 6 Temperature indicator
Fig. 7 Error indicator
Fig. 8 Locked condition indicator (only with remote control)
Fig. 9 Flame indicator
Fig. 10 Solar mode indicator
Fig. 11 Remote control indicator
4.2 Before operating the appliance
▶ Confirm that the gas type of the heater matches the gas
supply you will be connecting the heater.
▶Open gas valve.
CAUTION:
Do not use any cleaning aggressive or
corrosive agents to clean the window.
CAUTION:
▶ The initial startup of the heater must be
realized by a qualified technician, who
will provide the client with all the
information necessary for its correct
usage.
Check for gas leaks at all joints.
To Next Page
Loading...
