6 720 680 174 (2014/05) Therm 8000S
16 | Installation instructions
▶ Fix the fixing bracket to the wall using the screws and plugs
provided.
Fig. 22 Fix the fixing bracket
5.5 Installation
▶ Remove appliance from packaging.
▶Ensure that all indicated parts are included.
▶ Remove the plastic caps from the gas and water
connections.
▶ Loosen the two Philips head screws located on bottom rear
of cover (Fig. 23).
Fig. 23 Loosen the two screws
▶ Lift front cover panel upward and remove.
Fig. 24
▶ Fix the appliance in a vertical position.
CAUTION: Possibility of damage caused by
foreign bodies!
▶ Purge all tubes to eliminate possible
foreign bodies.
To Next Page
Loading...
