6 720 680 174 (2014/05) Therm 8000S
4 | Technical Characteristics and Dimensions
2 Technical Characteristics and Dimensions
2.1 Declaration of conformity with relevant EEC
regulations
This appliance fulfills European directive requirements
2009/142/EEC, 92/42/EEC, 2006/95/EEC, 2004/108/EEC
and corresponds to the specifications described in the
corresponding EEC certificate of proof.
2.2 Explanation of Model Code
[GWH] Gas water heater
[C] Condensing
[27] Capacity (Liter per minute)
[C] Room sealed box
[T] Thermostatic
[D] LCD
[E] Electric ignition
[23] Appliance adjusted for Natural Gas
[30] Appliance adjusted for LPG
2.3 Package contents
• Gas heater
• Support elements
•Heater documentation
2.4 Description of the heater
• Heater for wall-mounting
• High power pre-mix compact burner with low NOx emissions
• Modulating Gas Valve with constant gas:air ratio control
• LCD panel with back light
• Failure codes for easy diagnostics and repair
• Electronic ignition
•Modulating water valve:
– Cold water temperature sensor
– Water flow sensor
• Hot water temperature sensor
•Safety devices:
– Flame failure device (ionization flame rod sensor)
– Back flow temperature sensor
– Inlet temperature sensor
– Outlet temperature sensor
– Room sealed box temperature sensor
– Over heat prevention (temperature limiter)
• Power supply: 230 V, 50 Hz
• IP X4 (protection against water drops)
2.5 Optional accessories
• Gas conversion kit (NG)
– Code nº 8 719 002 460
• Freeze prevention kit
– Code nº 7 709 003 709
•Outdoor kit
– Code nº 7 709 003 732
•Cascading kit
– Code nº 7 736 500 272
• Wireless remote control to operate with the appliance
– Code nº 7 709 003 756
• High temperature kit
– Code nº 7 736 500 605
Model GWHC 27 CTD E
Category II
2H3B
Type C
Table 2
GWHC 27 C TDE2330
Table 3
To Next Page
Loading...
