6 720 680 174 (2014/05) Therm 8000S
22 | Admission / exhaustion accessories (accessory Ø 80/125 mm)
6 Admission / exhaustion accessories
(accessory Ø 80/125 mm)
6.1 Admission/exhaustion accessories (diameter
in mm)
6.1.1 Concentric pipe admission /exhaustion Ø80/125 mm
Once is done the connection of the vent
pipes it always necessary to verified and
guaranteed that is sealed.
DANGER: Make sure that all flue
connections are tighten sealed.
▶ Failure to follow this requirement may
cause dangerous exhaust gases to enter
living space which may result causing
personal injury or loss of life.
Type Description TTNº
AZB 918 Horizontal basic Kit with 1300mm - Ø80/125 7 719 002 848
AZB 604/1 Concentric pipe with 500mm - Ø80/125 7 719 002 763
AZB 605/1 Concentric pipe with 1000mm - Ø80/125 7 719 002 764
AZB 606/1 Concentric pipe with 2000mm - Ø80/125 7 719 002 765
AZB 607/1 Elbow 90° - Ø80/125 7 719 002 766
AZB 608/1 Elbow 45° - Ø80/125 7 719 002 767
AZB 832/1 Elbow 30° - Ø80/125 7 719 002 768
AZB 919 Concentric vertical terminal Ø80/125, with 1393 mm + adapter with measuring point 7 719 002 849
AZB 371 Adapter for flat roof 7 716 050 046
AZB 921 Adapter with measuring point 7 719 002 851
AZB 922 Converter from Ø80/125 to Ø80/80, with measuring points 7 719 002 852
AZB 931 Vertical adapter with measuring point 7 716 780 184
Table 5 Flue accessories Ø80/125
Type Description TTNº
- Accessories for the exhaustion / admission of air - Ø 80/80 7 709 003 733
AZ 381 Elbow 90º - Ø80 7 716 050 056
AZ 382 Elbow 45º - Ø80 7 716 050 057
AZ 383 Pipe Ø80 of 500mm 7 716 050 058
AZ 384 Pipe Ø80 of 1,000mm 7 716 050 059
AZ 385 Pipe Ø80 of 2,000mm 7 716 050 060
AZ 387 Terminal Ø80 7 716 050 062
AZ 378 Vertical terminal 7 716 050 053
Table 6 Flue accessories Ø80/Ø80
To Next Page
Loading...
