6 720 680 174 (2014/05) Therm 8000S
40 | Maintenance
▶ Check water level in the condensate trap (see Fig. 63 ).
Fig. 63
▶ After filling reassemble all parts in reverse order.
9.4 Startup after maintenance
▶ Check all water and gas joints.
▶ Read chapter 4 "Operating instructions" and/or chapter 8
"Installation instructions".
▶ Check gas pressure (burner pressure).
▶Make sure combustion cover is securely fastened.
▶ Ensure the exhaust vent adaptor is properly sealed.
▶ Check for gas leakage.
▶ Check for water leakage.
To Next Page
Loading...
