6 720 680 174 (2014/05) Therm 8000S
36 | Installation instructions
Fan speed for separate tubes Ø80/80 mm
Fan speed for concentric conducts Ø80/125 mm
Mode Conduct length
1)
1) Total conducts lengths of Table 18 . Do not count with the
first elbow and the accessory of wind/rain protection.
Fan speed
P2 From 1 m until 6 m 12
from 6.1 m until 14m
13
from 14.1m until 16 m
14
Table 23
Mode Conduct length
1)
1) Total conducts lengths of Table 21 . Do not count with the
first elbow and the accessory of wind/rain protection.
Fan speed
P2 From 1 m until 3 m 12
from 3.1 m until 7 m
13
from 7.1m until 8 m
14
Table 24
Do not set P2 to greater then 14.
To Next Page
Loading...
