Bosch VCU - Adaptation and Documentation; Software Tools (Free Download); USB Kit

4 | Technical Data
8/136 Vehicle_Control_Unit_VCU_Manual Bosch Motorsport
possible,
Fixed pullup 2.15 kOhm (required for Hall),
Tooth count differential*
Thermocouple 4 universal
Bosch Laptrigger 1
TimeSync master and slave (specific to
Bosch measurement system)
1
Internal measurement 1 ambient pressure
1 ECU temperature
20 supply voltage
20 supply current
1 battery voltage (external VCU supply)
1 external VCU supply current
4 HS output current
Outputs
PWM High side 2*; 7.5 A each, PWM, 50 Hz
PWM Low side 4*; 2.2 A each, PWM, 10 kHz
*can be enhanced by Upgrade I/O Package, see below
Power Supplies
12 V, 400 mA each 5*
Switchable 5 V/12 V, 400 mA each 5*
Max overall current 4 A on all 12 V
2 A on all 5 V
Precision 12 V ± 1 % on the pin
Precision 5 V ± 0.1 % on the pin
Sensor ground 20
*can be enhanced by Upgrade I/O Package, see below
Adaptation and Documentation
Function documentation Automatically created during code genera-
tion
MatLab code generation Support for customer own MatLab function
development
Software Tools (free download)
Data Analysis tool WinDarab 7 Free
System Configuration tool RaceCon Logger configuration, calibration and on-
line measurement
USB Kit
Software license for USB-port unlocked
Rugged USB flash drive
Adapter cable to USB-port