Set up and connect de
The device has an automatic quantity
control.
3. Open the appliance door.
→
"Basic operation ", page 31
a The automatic amount fits that
The water consumption and the duration of the
program are optimally adapted to the type of
textile and the amount of load.
4th Remove the accessories from the
drum.
5. Close the appliance door.
4.2 Scope of delivery
3.3 Energy saving mode
After unpacking, check all parts for
transport damage and that the
delivery is complete.
If you do not operate the device for a
long time, it will automatically switch
to energy-saving mode. The energy-
saving mode can be ended by
operating the device again.
If you continue not to operate the
device, it will switch off.
CAUTION!
Operation with incomplete or
defective accessories can impair the
function of the device or lead to
property and device damage.
▶
Do not operate the device with
incomplete or defective
accessories.
▶
Replace the corresponding accessories
before operating the device.
→
"Accessories ", page 30
Notice: The device does not turn off
automatically when Wi-Fi is enabled.
A.4 Set up and
Connect
Setting up and connecting
Notice: The device has been checked
for perfect function in the factory.
This can leave water marks in the
device. The stains disappear after the
first wash.
Set up and connect
4.1 Unpack the device
CAUTION!
Objects left in the drum that are not
intended for use in the device can
cause property damage and damage
to the device.
▶
Remove these items and the
accessories supplied from the drum
before use.
The delivery consists of: ¡
Washing machine
¡ Accompanying documents
¡ Transport locks
→
"Remove the transport locks ",
page 14
¡ Cover caps
¡ Elbow to fix the water
drain hose
1. Completely remove packaging material
and protective covers from the device.
→
"Dispose of packaging ",
page 12
.
2. Check the device for visible damage.
13th
To Next Page
Loading...
