EasyManua.ls Logo

Bosch WAX32MX2 - Emergency Release; Transport, Storage and Disposal; Dismantling the Device; Locks

Bosch WAX32MX2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transport, storage and disposal de
18.1 Emergency release
2. Empty the water inlet hose.
3. Switch off the device.
Unlock the door
4th Unplug the device from the
mains.
Requirement: The drain pump is
empty.
Page 40
5. Drain the detergent solution.
"Cleaning the drain pump ",
page 40
1. ATTENTION! Leaking water can
cause property damage.
Do not open the door if you can see
water on the glass.
6th Remove the hoses.
Pull the emergency release down
with a tool and release.
19.2 Use transport locks
Secure the device for transport with
the transport locks to avoid damage.
1. Remove the 4 cover caps with a
screwdriver.
a The door lock is unlocked.
2. Insert the maintenance flap and click
into place.
3. Close the maintenance hatch.
Keep the cover caps.
T1transport, storage and disposal 9 Transport,
2. Install the 4 transport locks. Use the
description of Removing the
transport locks as a guide and
proceed in reverse order.
Storage and disposal
TE.transport, storage and disposal Find out how to use your device here
prepare for transport and storage.
You will also learn how to dispose of
old devices.
19.3 Put the device into
operation again
19.1 Dismantling the device
Notice: You can find more information
on usage at www.bosch-
h the scanning
on the front page
iteration.
For more information see
"Installation and connection ",
page 13
and
"Before using for the first time ",
page 21
.
home.com or durc
the QR code a of these
operating instructions
1. The faucet s close.
53

Table of Contents

Related product manuals