de Cleaning and care
4th Insert the pump cover.
17.4 Clean the inlet opening in
the rubber sleeve.
gene
- Make sure that the components
of the pump cover are correctly
installed.
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
1. Open the appliance door.
2. Remove the blockages from the inlet
opening.
5. Close the pump cover as far as it
will go.
90 °
Notice: Do not use any pointed or
sharp objects.
The handle of the pump cover
must be vertical.
6th Insert and close the maintenance
flap.
2
1
42
To Next Page
Loading...
