Cleaning and care de
9. Clamp the drainage hose into the
holder.
2. Clean the interior, the thread of the
pump cover and the pump housing.
Clean the drain pump
The pump cover consists of two
components that can be
disassembled for cleaning.
Requirement: The drain pump is
empty. ā
Page 40
1. Since there may still be residual
water in the drain pump, carefully
unscrew the pump cover.
3. Make sure that both impellers can
be turned.
- The filter insert can get stuck in
the pump housing due to coarse
soiling. Loosen any dirt and
remove the filter insert.
41
To Next Page
Loading...
