Bosch WAX32MX2 - Function

Home Connect de
Enter the QR code in the table of
contents or at www.bosch-
home.com.
15.1 Device with WLAN home
network (Wi-Fi) with
Connect the WPS function
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. You can find information on
this at: www.home-connect.com.
¡ → "Device with a WLAN home network
(Wi-Fi) with WPS function ", page
35
¡ → "Device with a WLAN home network
(Wi-Fi) without the WPS function ",
page 36
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
requirements
¡ Your router has a WPS
Function.
¡ Wi-Fi on the router is enabled. ¡ The
basic setting Wi-Fi on the
advisory is activated.
→ "Activate Wi-Fi on the device ",
page 37
¡ The device has a
Reception to the WLAN home
network (Wi-Fi).
¡ Home Connect app is on the
mobile device installed.
1. on Remote start at least 3 seconds
customers push.
a The display shows Aut.
2. on Start / reload to press.
Tips
¡ Note the supplied information
Home Connect documents. ¡ Also
note the information in
the Home Connect app.
3. Press the WPS button on the
router within 2 minutes.
Note the information in the
documentation for your router. a
Flashes in the display.
a The device connects to the
WLAN home network (Wi-Fi). a
When the display con shows and
lights up continuously, the device
is connected to the WLAN home
network (Wi-Fi).
Hints
¡ Note the safety instructions
in accordance with these
instructions for use and ensure
that they are adhered to when you
operate the appliance via the
Home Connect app.
→ "Security ", page 4
¡ Everyone has to operate the device
time priority. During this time,
operation via the Home Connect
app is not possible.
4th When the display Err shows, the
device is not connected to the
wireless home network (Wi-Fi).
- Check whether the device is
within range of the wireless
home network (Wi-Fi).
- Reconnect the device to the
wireless home network (Wi-Fi)
with WPS function.
5. Connect the device to the Home
Connect app. → Page 36
35