Before first use de
V6th
before first use
a The display shows the remaining
Program duration.
a The display shows after program
end: -0-.
Before the first
use
VB.
before first use
prepare the device for
8th. Start the first wash or press to
switch off the appliance.
ā
"Basic operation ", page 31
application before.
6.1 Start the empty wash cycle
Your device was thoroughly checked
before it left the factory. To remove
any residual water, wash without
laundry for the first time.
1. Press.
The switch-on process takes a few
seconds.
2. The program Clean the drum to
adjust.
3. Close the door.
4th Pull out the detergent drawer.
5. Pour heavy-duty powder detergent into
compartment II.
To avoid foam formation, only use
half the amount of detergent
recommended by the detergent
manufacturer for light soiling. Do
not use detergent for wool or mild
detergents.
6th The detergent sh
push.
load the drawer
7th To the program
Start / reload
to start on
to press.
21
To Next Page
Loading...
