de Set up and connect
2. To align the device, turn the device
feet. Check the alignment with a
spirit level.
2. Check that the power plug is firmly
seated.
All device feet must be firmly on
the floor.
3. Tighten the lock nuts hand-tight
against the housing with an SW17
wrench.
Hold the device base firmly and
do not adjust the height.
4.8 Connect the device
electrically
1. Insert the plug of the power cord of
the device into a socket near the
device.
The connection date
you in the Tec
ā
Page 56
.
n the device's
Finnish data
18th
To Next Page
Loading...
