de Cleaning and care
17.3 Cleaning the drain pump
6th Take the drainage hose out of the
holder.
Clean the drain pump in the event of
malfunctions, e.g. B. in the case of
blockages or rattling noises.
Empty the drain pump
1. Turn off the tap.
2. Switch off the device.
3. Disconnect the device's power plug from
the power supply.
4th Open and remove the
maintenance hatch.
7th
CAUTION - Risk of scalding!
The detergent solution becomes hot
when washing at high
temperatures.
▶
Do not touch the hot detergent
solution.
1
2
To allow the detergent solution to
drain into the container, pull off
the cap.
5. Slide a sufficiently large container
under the opening.
8th. Press on the cap.
40
To Next Page
Loading...
