SYSTEM CONTROLS
In Stored source, queues up and plays other stored tracks that most closely match
the style
of
the currerlt track.
In
Teletext mode, selects the content labeled red.
In
Stored source, when used
in
conjunction with the number keys, plays the tracks
from a specific stored CD
of
that number.
In Teletext mode, selects the screencontent labeled green.
In Stored source, plays all the tracks, if
any,
assigned
to
the playlist.
In Teletext mode, selects the screen content labeled yellow.
®
CD#
@
CD#
@
Encore
®
Playlist
o
Playlist
@
Encore
@
Whole
CD
In Stored source, queues up and plays other stored tracks that most closely match
the style
of
the current track.
In
VCR
source (or
AUX,
if a recorder-type device
is
connected to that input),
activates the record function. Not available on remotes set to control Teletext.
In Stored source, when used
in
conjunction with the number keys, plays the tracks
from a specific stored CD
of
that
number.
In Cable source, makes a selection from the A list.
In Stored source, plays all the tracks, if
any,
assigned
to
the playlist. Can be used
with additional play mode options, like Encore.
In
Cable source, makes a selection from the B list.
@ In Stored source, skips from the track currently playing to the first track on the CD
Whole
CD
of
origin and plays that CD from beginning
to
end.
In Cable source, makes a selection from the C list.
b.
If
your
remote features the @ symbol (above the Librarybutton), the four colored buttons
at
the
bottom
function as follows:
a.
If
your
remote features the 8 symbol (above the Library button), the four buttons
at
the
bottom
function as follows:
In Stored source,
skips from the track currently playing
to
the first track on the CD
of
origin and plays that CD from beginning
to
end.
In Teletext mode, selects the screen content labeled blue.
) Note:
To
switch your remote from
a.
functionality to b. (described above), refer to "Remote
control options" on page
39 and locate the "Selecting a Remote Control version" option.
Previous
Info
(Shuffle)
.....,
,.....
(Repeat)
Presets
000
0®®
0®®
00
0
...
000
(CE)Seek@
Rating
@OOO
Encore
CD
#
P1aylisf
.Whole
CD
o
• 0
Library
ow
Menu
o 0
Settings
Guide
~
Cd
Ch~~c~
A,
&
A_
Volume
Chapter
~
l:J
···BOSE,
~1~e\·
@:8
~y~~;t'/.;";,J:.·.i1f.il.j;1.f!4:\·
wn
Getting strong remote control range
and
response
The cord that connects the power supply
to
the media center contains
an
antenna for your
RF
remote. For good range, it
is
VERY
important that you extend this cord to its full length
and keep it away from other system cables. Placing the power supply
on
the floor, well below
the media center, puts the cord
in
a vertical orientation, which is optimum.
) Note: Also, when using a plasma screen
TV,
keeping the media center powersupply as far from
the
TV
as
is
practical improves remote range.
If your system does not respond when you press a button on the remote, it could be time
to
change the batteries. For information on the type
of
batteries
to
use and how
to
change them,
refer
to
"Replacing the remote control batteries" on page 52.
In
some buildings, there may be "dead spots" where remote control signals are not effective.
If this happens, move the remote a foot or
two
and try again. Also make sure the cord that
connects the power supply to the media center (and contains the remote antenna) is
stretched to its full length and
is
separated from other power cords. If this does not help,
move the media center a few feet
to
see if a new location provides better response.
If the batteries are not dead and your efforts
to
avoid dead spots are
in
vain, you may need
an
antenna extender.
To
contact Bose for more information, or to order the extender, refer
to
the
address list included with the system.
11
To Next Page
Loading...
