SYSTEM OPERATION
Using
the
radio
Press
FM/AM
to select the radio tuner. This turns on the system if it was off and tunes to the
FM
or AM station last selected.
;
Note:
For information on the quick adjustments you can make to CD settings, refer to
"CD settings options" on page
45. Instructions on
how
to enter the menu to make these changes
are available
in
"Where to find the list
of
options" on page 43.
Repeat a track...
Repeat a
CD
.
Cancel repeat .
Changing
stations
When
you
want
to:
Switch between
FM
and AM ...
Seek the next strong station...
Manually tune
to
a station...
r-..
{Repeat}
again.
r-..
{Repeat}
a third time.
Press:
GIl.
GJseek·B).
Select a preset station...
~
or
CD CD
0 by specific preset number.
Channel
0 ® ®
Ch~;l~~
T
CD
® ®
®
;
Note:
For information on the quick adjustments you can make to the radio tuner settings, refer to
"Tuner settings options
(FM
or
AM
radio)" on page 47. Instructions on
how
to enter the menu to
make those changes are available
in
"Where to find the list
of
options" on page 43.
Setting, removing,
or
reassigning radio station presets
You
can establish presets for up to 20
AM
and 20
FM
stations. This enables you to tune
in
a
favorite station quickly. There are
two
ways you can assign presets.
To
set
a preset, use
method
A
or
B
below:
A.
To
assign the next
preset
number
to
a station, use the media center control panel and
follow the next
two
steps for each station:
1.
Tune to the preferred station.
2.
On
the media center control panel, press the Enter button.
B.
Or,
to
assign a station to a specific
number
use the
L1FESTYLE®
remote control and follow
these steps:
1.
Tune
to
the preferred station.
2.
To
assign the station a preset number, press and hold that number button.
• For numbers 1 through
9,
press a single number and hold it until the display indicates
PRESET:
#
SET.
• For numbers 10 through 20, press the first number, then press and hold the second
number until the display indicates
PRESET:
#
SET.
23
To Next Page
Loading...
