SYSTEM
OPERATION
Initial pointers
to
get
you
started
Scanning
the
following
tips
may
prove worthwhile before using your system.
-1'
Note: For information on
how
to set the remote to operate other components, refer to "Using
your
LlFESTYL£®
remote with other components" on page 26.
To
turn
on
your system
• Press
the
OnlOff
button
on
the
remote control.
•
Or,
press the media
center
On/Off control.
•
Or,
press the
CD/DVD,
FM/AM,
TV,
CBUSAT,
or
AUX
remote button.
This turns on the system and selects
the
source
at
the
same time. Use
the
Stored
button
this
way, too, after you have stored music on
your
L1FESTYLE®
system.
To
use your system with
the
TV
and
other
components,
review
the
reminders below. They are
provided
to
help ensure
that
it all
works
together
smoothly.
To
turn
on
the TV
or
other
external
components
1. Turn on the system.
2. Press the remote control button
for
the
source you want.
3. Turn on the source, as needed.
You can use your
L1FESTYLE®
remote
to
control
the
above
functions
as soon as you set it
to
operate
the
TV
and other components.
To
watch a DVD
Your installation choices
may
require additional activation settings, as indicated below.
• Getting an image
to
appear
on
the
TV screen:
- Be sure
to
select
the
proper
video
input
on your
TV
(consistent with
the
video input
that
the
media center
connects
to
on
the
back
of
the
TV).
Use
the
L1FESTYLE®
remote
control
Input
button
Oust
below
the
TV
source button).
If
you have a
TV
that
supports
component
or
progressive scan
The
tips
below apply only
if
you have
made
a
component
connection between the media
center and your
TV.
• Using
the
component
video connection option:
- If you have a
component
video connection between
the
TV
and the media center,
be sure
to
make
that
selection on
the
display
of
the
media center (see Note below).
Otherwise, you
may
see nothing
on
your
screen when you select DVD as
the
source.
• Using
the
progressive scan capability
of
your
TV:
-
Make
sure there is a
component
video connection between
the
TV
and
the
media
center.
- Be sure
to
make
the
Progressive selection on
the
media center (see
Note
below).
Otherwise, you
may
see nothing on
your
screen when you select DVD as
the
source.
- For other video
components
connected
to
the
media center,
make
sure
the
component
is also connected using a
component
video adapter.
-1'
Note: For information on selecting component video on the media center (required for use
of
progressive scan as
well),
refer to "Higher-quality connections to consider"
in
your Installation
Guide.
14
To Next Page
Loading...
