SYSTEM OPERATION
Here's how
to
begin:
1.
Place the first CD into the disc tray
of
the media center and close the tray.
2.
Press the
Store
button, located on the media center control panel.
• During this process, the media center displays the message CD STORING and shows
what percentage
of
the task is completed.
•
To
interrupt or stop the storing activity at any time, simply open the disc tray.
•
To
resume storing the same disc, close the tray and press the
Store
button again.
3.
When it reaches
100%
and displays the text AUDIO CD STORED, remove the disc and
repeat steps
1-3 for each additional CD.
Storing takes about
5 minutes per disc. For more details, see "Planning time
to
store your
music" on page
49.
The basics
of
your
uMusic™
intelligent playback system
1. Press
Stored
to
select the stored music source. If the system is off, this will turn it on
in
the
uMusic™
system mode. It begins with the last-used preset.
2. Now you can simply sit back and listen,
or
make other choices:
• Press any number button,
1 through 9,
to
choose a different preset.
• Press - or +rating buttons if you have a particularly strong reaction
to
a selection.
) Note: Pressing - registers
your
displeasure with the current track, so the system moves immedi-
ately to
a new track. Use this rating when you hear a track that
is
inappropriate for the selected
preset
and
you want to lessen your chance
of
hearing the track again. Pressing +sends a strong
message that the current track
is
pleasing
and
music like it
is
appropriate for the selected preset.
• Press
Encore
to hear only music similar
to
the piece playing.
The system checks the music databases and selects only those tracks
in
your
collection with very similar attributes, so you can count on it
to
mirror that mood.
• Press
Whole
CD
to
hear the other tracks, in the order arranged, on the same CD.
• Press
CD#,
followed by its reference number,
to
move to a specific CD and hear all the
tracks on it.
) Note:
You
can refer to the log
at
the
back
of
the
book
(if you have noted
your
CDs there as you
stored them) to quickly locate the reference number for
a CD you want to
hear.
Your
remote
control options
16
When you want
to:
Pause the selection playing...
Resume play of a paused
selection...
Stop a selection...
Move
to
another selection...
Move
to
a previous selection...
Press:
OD.
QQorC8.
~
once. Then
CB
to
resume where it stopped.
Or,
~
twice to stop and reset. Then
C8
to
restart at
the beginning
of
the track or whole CD.
Channel~UP'
Track
Does not change stored music presets.
Chapter
T
~
down twice,
or
once only, if the track you want to
Ch;::::
skip has barely begun playing.
Chap'er
,.
Does not change stored music presets.
To Next Page
Loading...
