BASIC SYSTEM CONNECTIONS
Installing the TV
on/off
sensor
The TV on/off sensor works with the system
to
automatically turn on the
TV,
as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not
to
use the
sensor, you need
to
turn on your TV separately.
)0
Note: For information on
how
to set the LIFESTYLE'" remote to control
your
TV
and
work with the
sensor, refer to your
Operating Guide.
For a larger
TV,
you may
want
a second person
to
help as you follow the steps below:
1.
Plug the sensor cord connector into the
TV
SENSOR jack on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
jack
provided on the adapter (Figure 15 on page 18).
2.
Temporarily position the TV
on/off
sensor on the
back
of
your
TV.
)0
Note: DO
NOT
attach the supplied mounting strip until
you
have tested
and
activated the
automatic feature as explained below.
Figure
22
TV
on/off
sensor installed
on
your
TV
)0
Note:
Mount
the sensor on the bottom rear
of
a projection TV chassis. Front projectors with a
separate screen may
not
work with the sensor.
3.
Turn on your TV
to
test the sensor and activate the feature.
A. On the LIFESTYLE' system remote control, press
System.
@~._,
.
Use the arrows
to
move around the on-screen menu and
..
press
Enter
to
make
selections:
B. On the
TV
screen, move right
to
Video
and press
Enter.
C. On the rear
of
the
TV,
move the sensor as needed, and notice when the on-screen
TV Power Status changes from TV not detected to TV ON.
D.
Attach the included mounting strips, one
to
the sensor and one
to
the
TV,
and press
them together
to
hold the sensor in this effective position.
E.
On the
TV
screen, move
down
to
TV
Power, and select:
-
Automatic
(for TV models that
do
not use a European-style SCART
connector).
-
Euro
Connector
(for TV models that use a SCART connector).
F.
Press
Enter
to
confirm this setting.
G. Press
Exit
to
leave the System
me~u.
This completes activation.
25
To Next Page
Loading...
