BASIC
SYSTEM
CONNECTIONS
Connecting
speaker
cables to
the
module
Your LIFESTYLE" DVD system includes five small speakers. The type
of
speakers
in
your
system determines how the supplied cables connect
to
them.
• For Jewel
Cube@
speakers, follow the instructions below.
• For single cube or cube array speakers, follow the instructions on page 13.
Jewel
Cube
speaker
Jewel
Cube
horizontal center
speaker
Connecting the
Jewel
Cube@
speakers
The supplied cables feature a plug-in connector that ensures proper polarity
(+
to + and
-
to
-)
connections.
• Use the supplied 20-ft
(6.1
m)
cables for the three front speakers.
• Use the supplied 50-ft (15.2
m)
cables for the speakers at the rear
of
your room.
After running these cables
to
the rear
of
your room, you can unzip them by simply pulling
them apart. This makes it is easy
to
reach each
of
the rear speakers.
To
make the connections:
1. Notice the marking on each cable plug and match it
to
the speaker in that location:
•
Front
speaker
cable
plugs
have L (left), R (right), and C (center) markings.
•
Rear
speaker
cable
plugs
have
LR
(left rear) and
RR
(right
rear)
markings.
2.
Orient the plug with its small knob up, so the plug slips easily into a notch on
top
of
the
jack on the back
of
each speaker (Figure
8).
3.
Insert the plug fully into the jack on the rear
of
its respective speaker.
For example, the plug marked L connects
to
the speaker
at
the left front of your room.
~~
C
RR,
orLR
Cable
plug
4.
Follow the instructions on page 13 to connect each cable
to
the corresponding jack on
the
Acoustimass~
module.
Plug-in connections
to
these
speakers
Figure 8
12
To Next Page
Loading...
