BASIC SYSTEM CONNECTIONS
Figure
21
Media centerconnection panel
Using the
ADAPTiQ~
calibration headset
2. Put on the headset so it rests above
your
ears.
In
this position, it can listen (as you would)
and take sampling measurements
in
your room during the ADAPTiQ audio calibration
process.
3.
Follow the calibration process as directed on the TV screen.
Save
the
headset
for
possible future use
Keep the headset and discs together
in
their original carton and store them
in
a safe location.
You
may want
to
customize your system again if you move it
to
another room or significantly
change the arrangement
of
the room by relocating furniture,
the
speakers, or the
Acoustimass" module. You can reuse
the
ADAPTiQ system at any time.
Taking
the
next
steps
This completes the basic connection
of
your system and
TV.
Now you can:
• Install the TV on/off sensor, following instructions
in
the next section
of
this guide.
• Connect other components
to
the system, as instructed
in
"Optional Connections and
Additions" on page 26
of
this guide.
• Use the system as it is now set up. Refer
to
your Operating Guide for details.
24
To Next Page
Loading...
