CHANGING SOURCE SETTINGS
Figure
24
Changing the
number
of
speakers playing
How
to change the settings
In
the Settings menu on the media
@~
center display or on the TV screen,
move around and make changes
...
ENTER
~
by using the selection buttons shown. ';'
On
the display or the screen, the same actions apply:
• Press the left, right, up,
or
down arrows
to
get
to
the option you want.
• Press
Enter
or the left arrow
to
confirm your selection and move back to the features column.
• Repeat these steps for each change you want
to
make.
• Press
Extt
to leave the Settings menu.
The progression below shows how
to
change the number of speakers used when
FM
plays
(Figure
24).
A.
The
FM
Settings menu appears on the TV screen with 5 speakers as the default setting.
B.
Arrow buttons move right and up
or
down
to
change the number
of
speakers playing.
C.
Enter
or the left arrow confirms the new setting and moves back
to
the list
of
tuner
attributes.
You
can use the actions above
to
restore the original settings, too. Do this if you
do
not like
the effect of a change you have made, or accidentally made a change you did not intend.
The original (default) settings for each source are shown as the first option for each feature on
the pages that follow.
You
can restore all default settings by choosing Restore Settings
in
the Systems menu, under
Media Center. This reverses all changes you have made in both the Settings or System
menus. Instead of making this overall change, you can note the default setting listed on the
pages that follow, then re-select that setting
in
any
of
the sources.
44
To Next Page
Loading...
