OPTIONAL CONNECTIONS AND ADDITIONS
-
Cable
or
satellite box options
There are several ways
to
make the cable/satellite connections. Read these instructions
to
see
how
they will
work
with the components you own. If you have component jacks (three
colored jacks) on your cable
or
satellite
box
and
on your
TV,
you may prefer using another
type
of
connection (refer
to
"Connecting a
OVR
in addition
to
cable/satellite" on page 33).
To
connect
the
cable
or
satellite box
Connect cable/satellite L & R Audio OUT
to
the L & R Audio
IN
jacks for CBUSAT on the
media center (Figure 26).
1. Make the audio connection:
• Connect the
Land
R Audio output jacks from the cable/satellite
box
to
the
Land
R
Audio
IN
for CBUSAT on the media center.
2. Make the video connection:
• Make EITHER a composite
(A)
OR
an
S-Video
(B)
connection from the cable
or
satellite
box
to
the media center and use the SAME
type
of
connection from the media center
to
a TV Video input (Figure 26).
A.
If the cable/satellite box has only a Composite video
output
jack, connect that
to
the
Composite Video
IN
jack
on the media center.
B.
If the cable/satellite
box
has
an
S-Video
output
jack, connect it
to
the S-Video
IN
jack
on the media center. Then use another S-Video cable
to
connect the S-Video OUT
jack on the media center
to
a Video input
jack
on the
TV.
/
S-Video
cable
Composite
video cable
B.
/
S-Video
cable
•••
TV connector panel
B.
Cable
or
satellite connector panel
[fll
Composite
video cable
Audio cable
with 2 RCA
connectors
(red and white)
.)
Note:
Your
components
may
look different from
those shown above.
The
connection jacks
and
labels also may
differ.
Figure
26
n
l
and
media center
connections for
';W
a cable
or
satellite
box
~
From
cable,
satellite,~.":
or antenna
w.
---+--
To
another component, Yellow
like a
VCR
31
To Next Page
Loading...
