Bose SOLO II Series - Connect Two Sources to Soundbar

35
|
ENG
ALTERNATE SETUP
Connect two sources to the soundbar
If you don’t get sound from any source that’s connected to your TV, such as a
DVD/Blu-ray Disc™ player, cable/satellite box, game system, or DVR, connect the
source directly to the soundbar. Use only one audio cable for each source.
1. On the back of each source, locate the Audio OUT (digital) panel.
2. Choose a separate audio cable for each source using either Option 1 or Option 2
(see page 36).
NOTE: You MUST use either Option 1 or Option 2. Do not use the coaxial cable (not
provided) and optical cable at the same time.
3. If you haven’t already, disconnect your TV from the soundbar.
4. Separately connect the audio cable from each source’s Audio OUT (digital) panel
to the soundbar.
NOTE: Do not disconnect your source’s video cable, such as an HDMI cable, from
your TV.