Bose SOLO II Series User Manual

ALTERNATE SETUP
38
|
ENG
Connect a TV headphone port to the soundbar
If your TV only has a headphone port, use a 3.5 mm stereo cable (not provided) to
connect to the soundbar.
1. Insert one end of a 3.5 mm stereo cable into the TV headphones port.
2. Insert the other end of the cable into the d port on the soundbar.
Service
3.5 mm
TV Input
AUX Optical Coaxial Power
Soundbar port panel
Audio OUT
TV headphone panel
(or other variable
audio output)
3.5 mm stereo cable
(not provided)
3. Make sure your TV speakers are on.
Refer to your TV owner’s guide for more information.
4. To ensure optimal volume control from the soundbar:
a. Set your TV volume to 75% of maximum.
b. Set the soundbar volume using the remote.

Bose SOLO II Series Specifications

General

Speaker Type	Soundbar
Remote Control	Yes
Channels	2.0
Connectivity	Optical
Dimensions	21.6 x 3.4 x 2.3 inches
Wall Mountable	Yes