14
Settings for the Entire RC-5 (SETUP)
Parameter Value (Bold: default) Explanation
CC#80 FUNC
CC#81 FUNC
CC#82 FUNC
CC#83 FUNC
CC#84 FUNC
CC#85 FUNC
CC#86 FUNC
CC#87 FUNC
This sets the functions that are controlled when a control change message (controller numbers 80–87) is received
from an external MIDI device.
OFF No function is assigned.
TRK PLY/STP Switch between play/stop for track.
TRK CLEAR Clear the track.
TRK UND/RED Undo/redo recording or the most recent overdubbing for track.
TRK REVERSE Turn reverse play on/o for track.
TRK LEVEL1 Control the volume of track (LOOP LEVEL) in the range of 0–200.
TRK LEVEL2
Control the level in the range of 0–“maximum value,” with the LOOP LEVEL setting of track
as the maximum value.
TAP TEMPO
Press the switch several times at the desired interval to specify the tempo.
Long press the switch (two seconds or longer) to return to the previous tempo.
TEMPO UP Press the pedal to make the tempo faster.
TEMPO DOWN Press the pedal to make the tempo slower.
RHYHTM P/S Switch the rhythm between play/stop.
RHYTHM PLAY Play the rhythm.
RHYTHM STOP Stop playing the rhythm.
RHYTHM LEV1 Control the “LEVEL” (p. 10) of memory/RHYTHM in the range of 0–200.
RHYTHM LEV2
Control the level in the range of 0–“maximum value,” with the “LEVEL” setting of memory/
RHYTHM as the maximum value.
MEMORY INC Switch to the next memory.
MEMORY DEC Switch to the previous memory.
MEMORY LEV1 Control the “LEVEL” (p. 9) of memory/LOOP in the range of 0–200.
MEMORY LEV2
Control the level in the range of 0–“maximum value,” with the “LEVEL” setting of memory/
LOOP as the maximum value.
TRK REVERSE Control “REVERSE” of memory/LOOP.
TRK 1SHOT Control “1SHOT” of memory/LOOP.
REC ACTION Control “REC ACTION” of memory/LOOP.
DUB MODE Control “DUB MODE” of memory/LOOP.
AUTO REC Control “AUTO REC” of memory/LOOP.
TRK START Control “START” of memory/LOOP.
TRK STOP Control “STOP” of memory/LOOP.
FADE TIME Control “FADE TIME” of memory/LOOP.
REVERB Control “REVERB” of memory/RHYTHM.
PATTERN Control “PATTERN” of memory/RHYTHM.
VARIATION Control “VARIATION” of memory/RHYTHM.
VAR.CHANGE Control “VAR.CHANGE” of memory/RHYTHM.
KIT Control “KIT” of memory/RHYTHM.
RHY START Control “START” of memory/RHYTHM.
RHY STOP Control “STOP” of memory/RHYTHM.
REC COUNT Control “REC COUNT” of memory/RHYTHM.
PLAY COUNT Control “PLAY COUNT” of memory/RHYTHM.
RHY FILL Control “FILL” of memory/RHYTHM.
RHY PART1–4 Control “PART1”–“PART4” of memory/RHYTHM.
TONE LOW Control “TONE LOW” of memory/RHYTHM.
TONE HIGH Control “TONE HIGH” of memory/RHYTHM.
To Next Page
Loading...
Need help?
General
