Bowa ARC 303 - Menu Program 1 Set Language; Menu Program 2 Sound Level; Menu Program 3 Forced Coag Mode

6 Operation
46 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
6.4.2. Menu program 1 "Set Language"
The language of the menu programs is English and cannot be changed.
Use menu program "Set Language" to set the language for the standard
programs (language codes D = Deutsch; E = English; F = Français;
I = Italiano; S = Español; T = Türk; P = Polski).
1. Press the power limitation key for monopolar cutting 4.
2. Press the key for scabbing level 5/6 to select the appropriate
language.
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
After the front panel test has been run after the device is switched on,
the selected language is shown by the language code letter on the
"Bipolar Coag" display 22.
Pos: 51 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/M enü-Progra mm 2 "Sound Level" @ 5\mo d_127010971 8492_6.doc @ 3 8572 @ 3
6.4.3. Menu program 2 "Sound Level"
Use "Sound Level" to set the volume of the individual activation signals.
1. Press the power limitation key for monopolar cutting 4.
2. Press the key for scabbing level 5/6 to change the volume.
3. Press the power limitation key for monopolar cutting 11 to select
the next acoustic signal.
4. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Pos: 52 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedien ung/Menü-Progra mm 3 "Forced C oag Mode" @ 6\mod_129708 2760449_6.do c @ 48218 @ 3
6.4.4. Menu program 3 "Forced Coag Mode"
Use "Forced Coag Mode" to set the cutting and coagulation parameters
of the "Forced Coag" current.
For more information on "Forced Coag" mode see section "Forced
Coag" mode, page 26.
1. Press the power limitation key for monopolar cutting 4.
2. Press the key for scabbing level 5/6 to change the forced
coagulation mode.
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Pos: 53 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/M enü-Progra mm 3a "Gastr oCut-Modes" @ 5\mod_1270 109826961_6.doc @ 38608 @ 3