Bowa ARC 303 - Power, Voltage and Current Charts

11 Technical specifications
66 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
11.2. Power, voltage and current charts
Setting
Program
Monopolar CUT
0, 3, 8-99
Values measured on ohmic resistances without arc
formation for ARC 303
 Output power P [W] versus load
resistance R [Ω] with "Monopolar Cut"
settings 300 W, 200 W, 150 W and
100 W
Values measured on ohmic resistances with prior arc
formation for ARC 303
 Output power P [W] versus load
resistance R [Ω] with "Monopolar Cut"
settings 300 W, 200 W, 150 W and
100 W
Values measured on ohmic resistances without arc
formation for ARC 250
 Output power P [W] versus load
resistance R [Ω] with "Monopolar Cut"
settings "Monopolar Cut"
= 250 W/125 W
Values measured on ohmic resistances with prior arc
formation for ARC 250
 Output power P [W] versus load
resistance R [Ω] with "Monopolar Cut"
settings "Monopolar Cut"
= 250 W/125 W