Bowa ARC 303 - Page 78

11 Technical specifications
78 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
Setting
Program
Forced COAG Micro Non Cutting
2
Values measured on ohmic resistances
 Output power P [W] versus load
resistance R [Ω] with "Forced COAG
Micro Non Cutting" settings 30 W and
15 W
 Output power P [W] versus "Forced
COAG Micro Non Cutting" setting.
Rated load resistance = 500 
 HF output voltage U [Vp] versus
"Forced COAG Micro Non Cutting"
setting (no load)