Bowa ARC 303 - Page 82

11 Technical specifications
82 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
Setting
Program
Spray COAG
0, 1, 3, 8-99
Argon-Flex Spray COAG I
5-7
Argon Spray Open COAG II
4
Values measured on ohmic resistances
 Output power P [W] versus load
resistance R [Ω] with "Spray COAG",
"Argon-Flex Spray COAG I", "Argon
Spray COAG II" settings 120 W and
60 W
 Output power P [W] versus "Spray
COAG", "Argon-Flex Spray COAG I",
"Argon Spray COAG II" setting.
Rated load resistance = 500 
 HF output voltage U [Vp] versus "Spray
COAG" setting (no load)
 HF output voltage U [Vp] versus
"Argon-Flex Spray COAG" setting (no
load)
 HF output voltage U [Vp] versus "Argon
Spray COAG II" setting