BOXER 700HDX - Section 4 - Routine Service and Maintenance

Routine Service and Maintenance
4.1
Section 4 - Routine Service and Maintenance
The following information presents the routine service and maintenance required to make
sure that the machine functions safely and properly. More detailed service information is
contained in the Service Manual.
Table 4-1 Service Cycle Table
Activity
Daily
(10 Hours)
New
Machine
(20 Hours)
Weekly
(50 Hours)
Monthly
(200 Hours) Annual
Safety Placards I
Fuel C
Engine Oil C R* R† R†
Engine Oil Filter I R* R† R†
Engine Coolant I and A C**
Engine Radiator I****
Air Filter C R** R**
Fuel Filter I R**
Engine Idle Speed C
Check and Clean Battery Ter-
minals and Battery
I
Hydraulics
- Hydraulic Filter I R* R**
- Hydraulic Fluid Level I**** R**
- Hydraulic Hoses I
Grease I***
Track Tension I
Visual Check for
Loose/Missing Fasteners
I
Clean Oil Cooler Fins I
Inspect and Adjust
Track Tension
I
Inspect both Track Widening
Stop Bolts
I
Service Cycle - R = Replace I = Inspect A = Add C = Clean
† Refer to engine manual for oil change cycles.
* First 20 operational hours, then follow normal service cycle.
** Extremely dusty or dirty working conditions may require more frequent service/replacement.
*** Under very wet and muddy conditions, more frequent lubrication may be required.
****Check when cold, ll to max ll level.