BOXER 700HDX - Daily Maintenance Procedures

Routine Service and Maintenance
4.2
Daily Maintenance Procedures
Do the following procedures daily or every 10 operating hours:
1. Check condition of all warning and instructional decals. Before operating the
machine, replace any missing or damaged decals.
NOTE: Make sure to read and understand all WARNING and SAFETY decals
before operating the machine.
• Allow engine to cool before lling fuel tanks.
• Do not overll because fuel could spill onto hot engine parts and ignite or
explode.
• Make sure engine is turned off.
2. Check engine fuel and ll as needed:
a. The Boxer has a saddle tank (Item 1, Figure 4–1), on each side of the machine.
Figure 4-1 Fuel Level Check
b. Remove cap (Item 2, Figure 4-1) and visually inspect fuel level. Make sure that each
tank has been lled on a daily basis.
c. Carefully pour fuel into the tank, not exceeding level at bottom of ll spout.
CAUTION