iv User Manual Edition 06/10
BP-PR PLUS Series
Batteries Directive 2006/66/EC
Notice to Recyclers
To remove the lithium battery:
1. Disassemble printer and locate the lithium cell battery located on the main circuit board.
2. To remove, slide the battery from the coin cell retainer, remove the battery from the board, and
dispose of properly.
This product contains a lithium battery. The crossed-out wheeled bin is used to
indicate ‘separate collection’ for all batteries and accumulators in accordance
with European Directive 2006/66/EC. Users of batteries must not dispose of
batteries as unsorted municipal waste. This Directive determines the framework
for the return and recycling of used batteries and accumulators that are to be
collected separately and recycled at end of life. Please dispose of the battery
according to your local regulations.
To Next Page
Loading...
Need help?
General
