38 User Manual Edition 04/10
BP-PR PLUS Series
5-5 Device List
The Device list function prints out the most important information on hardware
components of the printer and connected devices. The printout occurs using the heat level
and print speed specified in the Setup > Print param. menu.
1. Insert printable medium (labels, endless paper) which extends across the entire
printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with
the maximum width.
3. Press the menu button.
4. Select Test > Device list menu.
5. Start printout with the button.
You can cancel the printout with the cancel button.
Figure 15. Device list
i
The printout occurs without taking the label gaps into consideration. This is why
endless media are most suitable for this purpose.
Device list
Mach4/300 - 10/09/2007 -15:14:17
Firmware V3.11 (Aug 9 2007) - #111070553751
Name Description
CPU Thor, #111070553751
PCB-Rev. 7, CPU-Rev. 4
TPH 300 dpi, 1248 dots
I/F1 Ethernet 10/100 MBit/s
MAC: 00:02:E7:02:28:F4
I/F2 USB 2.0 Device
I/F3 RS-232
IFFS 8MB
USB [1] Generic/Generic Hub
[0] Full Rev. 3.00
Mfr: 03EB,Class: 09/00,Protocol: 00, Phase: 20/0
USB [3] Frontpanel
[1/3] Full Rev. 2.05
Mfr: 0985,Class: FF/1C,Protocol: 00, Phase: 20/1
abc licensed under Artistic license from Yabasic 2.715 (www.yabasic.de)
CMU-SNMP © 1988-89 Carnegie Mellon University,© 1995 Glenn Waters
jTreeTable © 1997-1999 Sun Microsystems, Inc. All Rights Reserved
Portions of this software are © 2005 The FreeType Project
(www.freetype.org). All rights reserved.
mDNSResponder © 2002-2006 Apple Computer Inc. All Rights Reserved
Licensed under the Apache License, Version 2.0
To Next Page
Loading...
Need help?
General
