Brady BP-PR 300 PLUS Series User Manual

2 User Manual Edition 04/10
BP-PR PLUS Series
1-2-2 Peel-off Version
The peel-off version is prepared for peel-off mode and thus has an internal rewinder and a
pulling system comprised of a rewind assist roller and a locking system. Printing on labels
or endless media from rolls or fanfolds is possible.
Operation in Tear-off mode and with the ‘cutter’ or ‘external rewinder’ accessory is
possible by installing the tear-off plate (see “Operating Instructions“), as it is with the
standard version.
In peel-off mode, the label is peeled off the liner after printing. The label can be removed
by hand with the peel-off sensor (accessory). The liner is rolled up via the internal
rewinder.
For use in Internal Rewind mode, remove the locking system and replace the dispense
plate with a rewind guide plate. See “Operating Instructions“.
1-2-3 Overview of Types
Table 1. Overview of BP-PR PLUS Series printer types
Characteristics
BP-PR PLUS Series
Max. medium width in [mm]
120 180
Print resolution [dpi]
300 600 300
Printing width in [mm]
105.6 105.6 162.6
Max. print speed in [mm/s]
250 100 200
Standard version transfer printer
BP-PR 300 PLUS BP-PR 600 PLUS BP-PR 360 PLUS
Peel-off version transfer printer
BP-PR 300 PLUS-P BP-PR 600 PLUS-P BP-PR 360 PLUS-P

Brady BP-PR 300 PLUS Series Specifications

General

Brand	Brady
Model	BP-PR 300 PLUS Series
Category	Printer
Language	English