38 BradyPrinter i5100
Reflex Mark Dimensions (“Black Mark”)
Callout Description Dimensions
A Label distance (>2 mm)
L Width of reflex mark (>5 mm)
M Height of reflex mark (3 - 10 mm)
X Distance mark to middle of paper track for reflec-
tive sensor recognition
(-56 up to +10 mm)
Z Distance virtual label front edge to actual label
front edge
>Adjust software settings
0 up to A / recommended: 0
• Reflex marks must be on the back side of the material (liner).
• Specification is valid for black marks.
• Recognition of colored marks may fail. > Test for suitability to application.
Labels with reflex marks
Endless material with reflex marks
virtual label front edge
reflex mark
Feed direction
To Next Page
Loading...
