7
-
8
BRANSON K SERIES
FRONT AXLE FLIUD
Pull out the dipstick, clean the tip
of dipstick, put it back into the front
axle, and pull it out again to see if the
oil level is between the upper and
lower limit. If the oil level is below the
lower limit, add oil.
FILTERS / COOLANT RE-
PLACEMENT
ENGINE OIL FILTER
LXN5O705A
(1) Front Axle Oil
Drain the fluid through the drain
holes under the front axle.
Refill the fluid from the upper right
side of the front axle.
LXN5O706A LXN5O707A
(1) Drain Plug (1) Engine Oil Filter
Replace it every 300 hours or when
engine oil is changed.
Fi r s t 5 0hr f i l t er ha s t o be
changed.
•
NOTE